Creating a Kubernetes cluster on AWS EKS
by Bachu Paul, Devops Engineer, Rackspace Technology
In this blog, we will create a Kubernetes cluster in AWS with minimal steps. No to little knowledge of AWS is required to follow this blog.
Prerequisites:-
- You should have one AWS account. An AWS Free-Tier account is also good to follow this blog.
- Configure your aws cli with `aws configure` command by passing *AWS Secret Key ID* & *AWS Secret Access Key*. Enter your desired *AWS region* and *default output format.
Create an AWS VPC with public and private subnets. Replace the *region-code* with any AWS region that is supported by AWS EKS(Elastic Kubernetes Service). Replace the name *my-eks-vpc-stack* with any name you like.
"aws cloudformation create-stack \
--region region-code \
--stack-name my-eks-vpc-stack \
--template-url https://amazon-eks.s3.us-west-2.amazonaws.com/cloudformation/2020-10-29/amazon-eks-vpc-private-subnets.yaml"
Create an AWS IAM role to be assumed by your K8S cluster and add policies to that role. K8S cluster will make calls to other AWS services (like S3,ELB etc) on your behalf via this role.
To create a role, copy the below code to a file and name it as *eks_role.json*
{{< highlight json >}}
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Principal": {
"Service": "eks.amazonaws.com"
},
"Action": "sts:AssumeRole"
}
]
}
Run below command to actually create the role in AWS account
"aws iam create-role \
--role-name myAmazonEKSRole \
--assume-role-policy-document file://"eks_role.json""
Attach the required EKS managed policy to this role
aws iam attach-role-policy \
--policy-arn arn:aws:iam::aws:policy/AmazonEKSClusterPolicy \
--role-name myAmazonEKSRole
Open the AWS console at : https://console.aws.amazon.com/eks/home#/clusters to create a minimal EKS cluster
**NOTE:** Ensure you have chosen the desired region to create the EKS cluster.
You will see a similar webpage as below.
- Name: my-eks-cluster
- Kubernetes Version: 1.21 (give version as per your requirement by clicking on the drop down menu)
- Cluster Service Role: myAmazonEKSRole
- Click on Next
- VPC: my-eks-vpc-stack
- Click on Next
- Under Configure Logging, click on Next
- On the Review and Create page click on Create
- It will take some time for the above EKS cluster to have status as Active.
Proceed ahead only after the EKS cluster is in active state.
Configure your workstation/laptop to send requests to the newly created AWS EKS cluster
Give the _region-code_ same as where EKS cluster is provisioned above.
"aws eks update-kubeconfig --region region-code --name my-eks-cluster"
To verify you can communicate to EKS cluster from your workstation, run the below command:
"kubectl get svc"
You will see similar output.
Create an IAM role that will be assumed by the EC2 nodes that will act as worker nodes in EKS cluster and attach the EKS-managed policies to it.
Copy the below content in a file and name it "eks-node-group-role.json"
{{< highlight json >}}
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Principal": {
"Service": "ec2.amazonaws.com"
},
"Action": "sts:AssumeRole"
}
]
}
{{< /highlight >}}
Create the node IAM role
{{< highlight bash >}}
aws iam create-role \
--role-name myEKSNodeRole \
--assume-role-policy-document file://"eks-node-group-role.json"
{{< /highlight >}}
Add required EKS managed policies to above role
{{< highlight bash >}}
aws iam attach-role-policy \
--policy-arn arn:aws:iam::aws:policy/AmazonEKSWorkerNodePolicy \
--role-name myEKSNodeRole
aws iam attach-role-policy \
--policy-arn arn:aws:iam::aws:policy/AmazonEC2ContainerRegistryFullAccess \
--role-name myEKSNodeRole
aws iam attach-role-policy \
--policy-arn arn:aws:iam::aws:policy/AmazonEC2ContainerRegistryReadOnly \
--role-name myEKSNodeRole
aws iam attach-role-policy \
--policy-arn arn:aws:iam::aws:policy/AmazonEKS_CNI_Policy \
--role-name myEKSNodeRole
{{< /highlight >}}
In AWS Console go inside your EKS cluster (my-eks-cluster),then Configuration, then Compute, click on Add Node group (follow below snapshot)
Fill out the form with the following details:
- Name: my-eks-node-groups (can give any name here)
- Node IAM Role: myEKSNodeRole
- click on Next
- On Set compute and scaling configuration, click on Next
- On Specifying networking, click on Next
- On Review and Create page, click on **Create**.
- It will take some time to come online to these node groups.
To verify if your EKS cluster is running fine, run the below command
"`kubect get nodes"
You should see a similar output.
Recent Posts
Escalando el acantilado de la ingeniería de plataformas: Un viaje hacia la innovación y la eficiencia
Julio 11th, 2024
Cómo funcionan las estrategias de fragmentación: Párrafo, oración y técnicas inteligentes
Julio 4th, 2024
Arquitectura basada en células en AWS
Mayo 6th, 2024
Una guía esencial para liberar el poder de la AI generativa
Julio 6th, 2023