Rackspace Cloud Monitoring has several different types of checks with corresponding alarms to choose from. A check determines which aspect of the server you want monitored. The alarm activates based on specific parameters you set on the server.
Checks determine the system to be monitored. You can get a list of available checks by looking at your options in the Check Type menu after clicking the Create Check button in a server's monitoring page.
The checks are listed in two separate groups:
- Remote service checks: These check types test the Internet connectivity of the servers from remote data centers in regions specified in the check options.
- Agent checks: These checks are performed by the monitoring agent running on your server. They monitor the resource utilization of the server. Learn more about this software here.
Check and alarm settings
Each check and alarm has selectable options.
- Check options define what a check will do each time it is executed.
- Alarm options trigger a notification when a check fails.
The checks are defined below. For the official definitions, see our detailed documentation. Please note, only those checks listed below are available through the control panel.
Remote checks are performed from multiple zones. Default zones can be changed.
- HTTP check: This check monitors the URL or IP you choose for specific HTML status codes or for text in the body of the page (body match).
- HTTP alarm: The standard alarm for the HTTP check is Connection time and Status Code. When the criteria of the alarm is met a notification is issued.
- TCP check: This check monitors a port number on a IP or hostname you specify.
- TCP alarm: The standard alarm for the TCP check is Connection time. When the criteria of the alarm is met, a notification is issued.
- Ping check: This check sends your server a number of ping packets that you specify and waits for a response for a set amount of time. We recommend that 10 packets be sent.
- Ping alarm: The standard alarm for the ping check is Ping packet loss. You can specify what percentage of packet loss must occur for you to be notified.
Agent checks are performed by the monitoring agent installed on your server.
- Memory check: This check monitors and displays your server's memory use (RAM). It also displays your server's historical usage.
- Memory alarm: This alarm notifies you when your server memory usage goes above the percentage you set in the criteria.
- CPU check: This check monitors and displays your server's CPU usage. It also displays your server's historical usage.
- CPU alarm: This alarm sends a notification when your CPU usage average exceeds the set criteria.
- Load average check: This check monitors and displays your system's load average. This option is most often used with Linux machines.
- Load average alarm: This alarm sends a notification when your system's load exceeds a number you specify for greater than X number of minutes. X is generally set for 5 minutes.
- File system check: This check monitors and displays disk usage in a directory that you specify.
- File aystem alarm: This alarm sends a notification when the disk space in your specified directory exceeds the parameter you set.
- Network check: This check monitors your network receiving and transmitting traffic. The unit of value for this alarm is megabits per second (Mbit/s). This check also displays your traffic usage. Unlike the other alarms in this list, you set the network check alarm variable upon network check creation.
- Network alarm: This alarm sends a notification when either of the network receive or the network transmit rate alarms are triggered.
© 2011-2013 Rackspace US, Inc.
Except where otherwise noted, content on this site is licensed under a
Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License
See license specifics and DISCLAIMER