Changing DNS Settings on Linux
There may be times you need to change your server's DNS settings, either because you find they're misconfigured or because you want to use your own. Fortunately there isn't a lot of work involved in changing the DNS servers, just a quick edit in the right place.
On Linux the DNS servers the system uses for name resolution are defined in the file:
It's spelled just like that, with no "e" at the end of "resolv".
In that file we'll want to have at least one "nameserver" line (two is better, so we have a fallback). Each line defines a DNS server.
The name servers will be prioritized in the order the system finds them in the file. Use the IP addresses of the name servers when entering them, since the system won't know what to do with domain names until after it knows how to get to the DNS servers.
Open resolv.conf with an editor like nano to make the necessary changes (if it doesn't exist already this will create the file for us):
sudo nano /etc/resolv.conf
Rackspace Cloud Hong Kong
If your Cloud Server is in the Hong Kong (HKG) datacenter you should use:
nameserver 126.96.36.199 nameserver 188.8.131.52
Rackspace Cloud UK
If you're on Rackspace Cloud UK you can use our closest DNS servers by making the contents of the /etc/resolv.conf file read:
nameserver 184.108.40.206 nameserver 220.127.116.11
Rackspace Cloud USA - ORD
If your Cloud Server is in the US Chicago (ORD) datacenter you should use:
nameserver 18.104.22.168 nameserver 22.214.171.124
Rackspace Cloud USA - DFW
If your Cloud Server is in the US Dallas/Fort Worth (DFW) datacenter you should use:
nameserver 126.96.36.199 nameserver 188.8.131.52
Rackspace Cloud AUS - SYD
If your Cloud Server is in the Sydney, Australia datacenter you should use:
nameserver 184.108.40.206 nameserver 220.127.116.11
A quick test
Once you have your DNS servers set, save the file. And you're done. No reboot required.
The easiest way to make sure your new settings are good ones is to try to ping a domain name:
ping -c 3 rackspace.com
You should see a result like:
PING rackspace.com (18.104.22.168) 56(84) bytes of data. 64 bytes from 22.214.171.124: icmp_req=1 ttl=249 time=25.3 ms 64 bytes from 126.96.36.199: icmp_req=2 ttl=249 time=25.2 ms 64 bytes from 188.8.131.52: icmp_req=3 ttl=249 time=25.2 ms --- rackspace.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms rtt min/avg/max/mdev = 25.236/25.292/25.392/0.147 ms
If you get an "unknown host" message back you should double-check the IP addresses you set as your DNS servers.
If you're using IPv6 on your server you may need to add the IPv6 addresses of your name servers to resolv.conf. You can see if a DNS server has an IPv6 address with two steps.
First, use "host" to get the name of the server:
$ host 184.108.40.206 240.128.3.72.in-addr.arpa domain name pointer cachens1.dfw1.rackspace.com.
Then use the domain name you got back in another "host" lookup:
$ host cachens1.dfw1.rackspace.com cachens1.dfw1.rackspace.com has address 220.127.116.11 cachens1.dfw1.rackspace.com has IPv6 address 2001:4800:d::1
If an IPv6 address is returned you can add that as another "nameserver" line in resolv.conf, as in:
Then test as above, using the "ping6" command instead of the regular "ping" command to force the system to use IPv6.
It's that simple - change or add those name servers and once the settings are saved the system will use them right away. Make sure the changes take with a quick ping to test it and you'll be done.
© 2011-2013 Rackspace US, Inc.
Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License
See license specifics and DISCLAIMER