A quick start guide to launching the Brocade Vyatta vRouter


Introduction

Follow this quick-start guide to spin up a Brocade Vyatta vRouter (formerly known as Vyatta network appliance). Keep in mind that the username for logging into the appliance once the appliance is up and running is "vyatta" and NOT "root." The minimum server size that you will be able to choose is one with a 1GB RAM.

The configuration basics for this appliance can be found in Chapter 4 of the quick start guide at

http://3e851594df14a9eacdef-5cc7866f7aae0a382278b5bce7412a4a.r58.cf1.rackcdn.com/Vyatta-QuickStart_6.5R1_v01.pdf

 

Launching the appliance

1. Click on the "Create Server" button. The Vyatta image should be listed in the list of images. Look for an image called "Vyatta Network OS 6.5R2" and select it.

2. Choose the server size (The minimum size for the server is 1GB).

3. If you have cloud networks enabled, you can create a new network or choose from an existing network to attach to a server (This is in addition to PublicNet and ServiceNet). Do not disable PublicNet or ServiceNet.

4. Click on “Create Server.” At this point you should see the root-password for the appliance. Make note of this password. Keep in mind that you will be able to ‘ssh’ into the appliance using a username “vyatta” and NOT “root.”

5. Configure the appliance. The appliance can only be configured via the command-line-interface. You must 'ssh' into the device on the Public interface with username "vyatta" and the password from the previous step (or anything you changed it to).

$ ssh vyatta@X.X.X.X
Welcome to Vyatta
vyatta@x.x.x.x's password:
Welcome to Vyatta
Version:      VSE6.5R2
Description:  Vyatta Subscription Edition 6.5 R2
Copyright:    2006-2012 Vyatta, Inc.
Last login: Fri Apr  5 20:07:03 2013 from x.x.x.x
vyatta@vyatta-thefinal:~$

You are in operational mode. You can run basic commands such as the following:

vyatta@vyatta-thefinal:~$ show interfaces

Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down

Interface        IP Address                        S/L  Description

---------        ----------                        ---  -----------

eth0             xx.xx.x.xx/24                   u/u  public

xxxx:xxxx:xxxx:514:xxxx:xxxx:xxxx:xxxx/64

eth1             10.x.x.x/17                   u/u  private

eth2             192.168.3.4/24                    u/u  dot-three

eth3             192.168.1.2/24                    u/u  dot-one

eth4             192.168.2.16/24                   u/u  dot-two

lo               127.0.0.1/8                       u/u 

::1/128

vyatta@vyatta-thefinal:~$

vyatta@vyatta-thefinal:~$ show configuration

interfaces {

ethernet eth0 {

address x.x.x.x/24

address xxxx:xxxx:xxxx:514:xxxx:xxxx:xxxx:xxxx/64

description public

duplex auto

hw-id bc:76:4e:04:90:0a

smp_affinity auto

speed auto

}
<edited>
}

You can go into configuration mode by typing the command ‘configure’

$ configure
[edit]
vyatta@vyatta-thefinal#

Refer to Chapter 4 of the quick start configuration guide for more details at

http://3e851594df14a9eacdef-5cc7866f7aae0a382278b5bce7412a4a.r58.cf1.rackcdn.com/Vyatta-QuickStart_6.5R1_v01.pdf

 

References

For Help with Vyatta configuration for specific use cases please refer to the following links: 

Firewall: http://www.rackspace.com/knowledge_center/article/configuring-interface-based-firewall-on-the-vyatta-network-appliance

Outbound NAT: http://www.rackspace.com/knowledge_center/article/configure-internet-access-for-cloud-servers-using-snat-on-vyatta

Site-to-Site VPN: http://www.rackspace.com/knowledge_center/article/configure-a-vpn-between-regions-using-the-vyatta-appliance

L2TP/IPSec VPN: http://www.rackspace.com/knowledge_center/article/configure-vpn-access-using-a-vyatta-appliance-on-a-private-cloud-network

VPN troubleshooting: http://www.rackspace.com/knowledge_center/article/trouble-shooting-a-vyatta-site-to-site-vpn-connection

Accessing Rackspace Services via Isolated networks using SNAT: http://www.rackspace.com/knowledge_center/article/accessing-rackspace-services-via-isolated-networks-through-the-vyatta-network-appliance

Control Panel "Actions" and limitations for Vyatta: http://www.rackspace.com/knowledge_center/article/vyatta-network-appliance-supported-actions-through-control-panel



Was this content helpful?




© 2011-2013 Rackspace US, Inc.

Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License


See license specifics and DISCLAIMER